Posted on

Subtractive EQ Part 4: Bass

Miss part 1? Read Subtractive EQ – Snare Drum.

Bass
The bass in this track caters to fans of the early Metallica era.  Bassist Cliff Burton popularized this distorted sound on such tracks as (Anesthesia) Pulling Teeth.  It’s important to blend this type of bass tone into the bottom of the guitars.  In this mix the guitars and the bass become a single unit ebbing and flowing with one another at certain points through the song.

Understandably one can assume that there was much processing done to this track before it’s transfer into SONAR.  It’s important to capture the sound before you start mixing so that your mixing process is not a patch-job.

This tone is aggressive and piercing to the ear.  A significant way to know that this instrument needs attention is by the aural fatigue that you may experience while soloing this track and listening to it rather loudly for more than 10 seconds.  I aimed to adjust the bass track to fit like a glove under the mix by applying a HPF at 78Hz with a steep bandwidth setting.  The amount of bass here needs control. Using a compressor to control the sound would be redundant because of how much overdrive was applied to this track.  The overdrive has ultimately eliminated any trace of strong transients.

Lastly, there is another dip in the EQ around 2.2kHz.  This adjustment reduces some of the aforementioned piercing sound. Any harsh tones in this register will be too overbearing in the mix.

Posted on

EDM Production – How To Create A Bass Synth with Z3TA+ 2

Introduction

Who doesn’t like bass? Especially synth bass. Z3TA+ 2 is the answer to all of your sound design needs especially when you are looking to improve your production in the low end. I’ve put together a short tutorial on how to make a simple bass synth inside of Z3TA+2. Once you understand how everything works together you’ll be able to really start to make this plugin work for you.

 

Picking the right Oscillators Continue reading “EDM Production – How To Create A Bass Synth with Z3TA+ 2”

Posted on

SONAR X3 Making Its Mark in the LA Scene

On the backend of the 2014 NAMM Show, we had an opportunity to take a spin around LA and drop in on a few SONAR users hard at work.  From rock, to EDM and just about every genre in between, here are what some SONAR X3 users in the LA scene are up to:

Adventure Club

While we were making the rounds, we were lucky enough to find out that the Canadian duo Adventure Club was camping out in downtown LA for a while with their mobile SONAR rig.  Adventure Club is defining a new wave of modern musicians and SONAR is at the forefront of their sonic assault.  Originally hailing from Montreal, the duo has recently been all over the globe playing to more and more dedicated fans after seeing the success of over 1.3 million views with their single “Gold” feat. Luna.  Their SONAR tracks have been streamed over a million times on Spotify, and they were noted in the 2013 Top 10 artists most consumed on SoundCloud.

AC has been touring across North America, as well as parts of Europe and Australia and has also played at various music festivals including the American Electric Daisy Carnival in Las Vegas, Nevada. They also made their first appearance at the Ultra Music Festival-2013 in Miami and additionally found themselves playing at the Ultra Music Festival in Seoul, South Korea in June 2013.

The duo’s remix of “Crave You” by the Flight Facilities was featured in the episode “Restraint” of the MTV television series Teen Wolf.  We got a chance to sit down with Christian and listen to some of his productions in SONAR and found it interesting to see how he gets some of his unique sounds Continue reading “SONAR X3 Making Its Mark in the LA Scene”

Posted on

SONAR User and Composer Jerry Gerber to Give A Power-workshop on MIDI at NAMM 2014

When programming complex orchestrations, getting that authentic “feel” can be a big challenge for any producer or composer regardless of the DAW at hand.  It takes many years of use-case scenarios along with a full bag of MIDI tricks of the trade.  Longtime SONAR user and MIDI-manipulator Jerry Gerber possesses both of these elements, and will be sharing his secrets at the 2014 NAMM show.   Interestingly, the workshop is not targeted for just SONAR users, but rather for anyone who wants to create the most artistic MIDI recordings possible with the technology they have available. Continue reading “SONAR User and Composer Jerry Gerber to Give A Power-workshop on MIDI at NAMM 2014”

Posted on

9 Microphone Techniques for Recording A Snare Drum

The recording of a snare drum is the focal point of every modern recording. It sits right in the center of the mix, below or above the vocals depending on the style of the music. In this article, I’ve outlined some mic placement techniques that will help focus in on getting specific snare sounds in your recordings.

1. Close Mic

Keep the Mic Close to the Snare


This is simple, easy, and very exposing. If you are looking to get that initial attack of your snare drum, use this type of placement. On its own it does not sound as appealing as one would first think, but once you add in the rest of your microphones you will begin to understand how the drumset takes shape.

Close mic’ing a snare drum captures ghost notes, Continue reading “9 Microphone Techniques for Recording A Snare Drum”

Posted on

Free Quick Kit Project Templates for SONAR X3 users

Quick Kit Project Templates

In celebration of Drum Month, Cakewalk has put together the first ever collection of Session Drummer 3 Quick Kits. These pre-mixed project templates load right from quick start menu in all three versions of SONAR X3 without any assembly required. Open a quick kit, drop in your sequence, and you’re ready to rock with great sounding drums. Happy drumming!

Quick Kit Highlights:

  • Free download for all SONAR X3, Studio, & Producer customers (thru Dec. 31st).
  • 65 pre-mixed Project Templates featuring Session Drummer 3.
  • 3, 6, & 12 channel templates in 13 genres.
  • Includes simple install instructions to add them to your Quick Start menu in SONAR X3.

How to Download SONAR X3: You can now Download SONAR X3 on the Cakewalk Store for just $105. SONAR X3 Upgrades start at just $49.

How to Download Quick Kits Project Templates: If you already purchased SONAR X3, you can download the free Quick Kits from your My Account page on the Cakewalk Store.  If you have not yet created an account, you will need to use the same email address as your SONAR X3 registration. Then proceed to the My Account section and under “Free Offers” you will see the Free Quick Kit Project Templates.

Posted on

Knowing Your Effects in Addictive Drums Part 2 (SONAR X3 Producer)

Quick Review

In the first part of this article we went through some of the primary effects every user should be aware of inside of Addictive Drums. To review, these effects were the Sampler, Pitch, Volume, and Snare sections of the EDIT section. Read Knowing Your Effects in Addictive Drums Part 1.

As I’ve stated in Part 1, Addictive Drums is a power-house when it comes to the amount of mixing options that are available within it’s mixing engine. Don’t let the small interface deceive you.

What is Compression?

Compression is a tool that has two main uses – controlling levels, and dynamically shaping the volume of a signal over time. Within Addictive Drums there is a compression section that outlines four basic parameters for compression: Threshold, Attack, Release, and Ratio.

Threshold

This parameter is the first part of the compressor that the signal hits Continue reading “Knowing Your Effects in Addictive Drums Part 2 (SONAR X3 Producer)”

Posted on

First Time DAW Users: 5 Things You Need To Know

As seen in the December ’13 issue of Regional Musician

Purchasing your first recording program is an exciting new chapter in your musical career. Now you can record your band practices and start making demos of all your songs in the comfort of your home. However, sometimes during the initial setup of your DAW, you will run into a few issues that could potentially be frustrating. Fear not, by following the right steps and optimizing your studio set-up, you will be well on your way to recording your music.

This article is meant to offer guidance on some terms and subjects that could be a bit foggy when starting out. Following these tips will help make your transition to a DAW much better and help you focus on what’s most important – making music.

1. First Things First

a. Terms you should know

Make sure you are using the correct driver mode for your audio interface or sound card. Some of these words may seem foreign to you if you are just starting out, so:

Driver Mode – When referring to digital audio we use the term “driver mode” to talk about a setting within your DAW that allows recording hardware to communicate with your computer. Continue reading “First Time DAW Users: 5 Things You Need To Know”

Posted on

Knowing Your Effects in Addictive Drums Part 1 (SONAR X3 Producer)

Intro

XLN Audio has mastered the art of sampling with their flagship program Addictive Drums. Not only have they been able to capture three incredible kits (standard in full version), but they allow the user complete control over the samples with an in depth effects engine. At first listen the provided presets speak for themselves, but as a power user you should not rely on the presets to define your sound. Let’s take a look at how much control you, as the user, have over the Snare drum and how that can benefit you.

First off, where does a great Snare sound come from?

The answer is easy, it comes from a great snare drum. A drum that is in tune, has a good balance of midrange and high-end, and is properly in phase with the rest of the drum set will always produce good results. A “great” snare sound can be subjective in the music world because many people have their own ideals and opinions about styles. The tactics and techniques used for capturing that snare drum is where the “magic happens” so to speak. XLN Audio provides three solid drum sets with three different kinds of Snare Drums.

Control, Control, Control!

Open up Addictive Drums, solo the Snare, and drop in a simple set of 4 hits and set them to loop mode. Like so:

Let’s take a look at the different options you have within Addictive Drums for creating a great Continue reading “Knowing Your Effects in Addictive Drums Part 1 (SONAR X3 Producer)”