Posted on

Call of Duty Composer: Sean Murray on SONAR X3 and Gobbler

Sean Murray

Composer

Being projected as one of the biggest selling pieces of media in history is a pretty big deal. On November 9th 2010, Call of Duty®: Black Ops was released and is being labeled as just that; and SONAR was the engine behind the scenes for the score. Even more exciting for one man, Sean Murray (Composer/Producer), is the fact that Activision has simultaneously released his soundtrack on a worldwide basis through an arm of Universal Music Distribution to coincide with the release of the game. Continue reading “Call of Duty Composer: Sean Murray on SONAR X3 and Gobbler”

Posted on

Basics: Five Questions about Latency and Computer Recording

Get the lowdown on low latency, and what it means to you

By Craig Anderton 

Recording with computers has brought incredible power to musicians at amazing prices. However, there are some compromises—such as latency. Let’s find out what causes it, how it affects you, and how to minimize it.  

1. What is latency? When recording, a computer is often busy doing other tasks and may ignore the incoming audio for short amounts of time. This can result in audio dropouts, clicks, excessive distortion, and sometimes program crashes. To compensate, recording software like SONAR dedicates some memory (called a sample buffer) to store incoming audio temporarily—sort of like an “audio savings account.” If needed, your recording program can make a “withdrawal” from the buffer to keep the audio stream flowing. 

Latency is “geek speak” for the delay that occurs between when you play or sing a note, and what you hear when you monitor your playing through your computer’s output. Latency has three main causes: 

  • The sample buffer. For example, storing 5 milliseconds (abbreviated ms, which equals 1/1000th of a second) of audio adds 5 ms of latency (Fig. 1). Most buffers sizes are specified in samples, although some specify this in ms. 

 Fig. 1: The control panel for TASCAM’s US-2×2 and US-4×4 audio interfaces is showing that the sample buffer is set to 64 samples. 

  • Other hardware. Converting analog signals into digital and back again takes some time. Also, the USB port that connects to your interface has additional buffers. These involve the audio interface that connects to your computer and converts audio signals into digital signals your computer can understand (and vice-versa—it also converts computer data back into audio).
  • Delays within the recording software itself. A full explanation would require another article, but in short, this usually involves inserting certain types of processors within your recording software. 

2. Why does latency matter? Continue reading “Basics: Five Questions about Latency and Computer Recording”

Posted on

Optimizing Vocals with DSP

Optimizing tracks with DSP, then adding some judicious use of the DSP-laden VX-64 Vocal Strip, offers very flexible vocal processing. 

By Craig Anderton 

This is kind of a “twofer” article about DSP—first we’ll look at some DSP menu items, then apply some signal processing courtesy of the VX64—all with the intention of creating some great vocal sounds. 

PREPPING A VOCAL WITH “MENU” DSP 

“Prepping” a vocal with DSP before processing can make the processing more effective. For example, if you want to compress your vocal and there are significant level variations, you may end up adding lots of compression to accommodate quiet parts. But then when loud parts kick in, the compression starts pumping. 

Here’s another example. A lot of people use low-cut filters to banish rogue plosives (e.g., a popping “b” or “p” sound). However, it’s often better to add a fade-in to get rid of the plosive; this retains some of the plosive sound, and avoids affecting frequency response. 

Adding a fade-in to a plosive can get rid of the objectionable section while leaving the vocal timbre untouched. 

Also check if any levels need to be evened out, because there will usually be some places where the peaks are considerably higher than the rest of the vocal, and you don’t want these pumping the compressor either. The easiest fix is to select a track, drag in the timeline above the area you want to edit, then go Process > Apply Effect > Gain and drop the level by a dB or two. 

This peak is considerably louder than the rest of the vocal, but reducing it a few dB will bring it into line. 

Also note that if you have Melodyne Editor, you can use the Percussive algorithm with the volume tool to level out words visually. This is really fast and effective. 

While you’re playing around with DSP, this is also a good time to cut out silences, then add fadeouts into silence, and fadeins up from silence. Do this with the vocal soloed, so you can hear any little issues that might come back to haunt you later. Also, sometimes it’s a good idea to normalize individual vocal clips up to –3dB or so (leave some headroom) so that the compressor sees a more consistent signal. 

The clip on the left has been normalized and faded out. The silence between clips has been cut away. The clip on the right fades in, but has not been normalized. 

With DSP processing, it’s good practice to work on a copy of the vocal, and make the changes permanent as you do them. The simplest way to apply Continue reading “Optimizing Vocals with DSP”

Posted on

The Art of Transient Shaping with the TS-64

Understand this often-misunderstood processor, and your tracks will benefit greatly 

By Craig Anderton 

Transient Shapers are interesting plug-ins. I don’t see them mentioned a lot, but that might be because they’re not necessarily intuitive to use. Nor are they bundled with a lot of DAWs, although SONAR is a welcome exception. 

I’ve used transient shaping on everything from a tom-based drum part to make each hit “pop” a little more, to bass to bring out the attacks and also add “weight” to the decay, to acoustic guitar to tame overly-aggressive attacks. The TS-64 has some pretty sophisticated DSP, so let’s find out how to take advantage of its talents.

But first, a warning: transient shaping requires a “look-ahead” function, as it has to know when transients are coming, analyze them, filter them, and then calculate when and how to apply particular amounts of gain so it can act on the transients as soon as they occur. As a result, simply inserting the TS-64 will increase latency. If this is a problem, either leave it bypassed until it’s time to mix, or render the audio track once you get the sound you want. Keep an original of the audio track in case you end up deciding to change the shaping later on. 

TS-64 TRANSIENT SHAPER BASICS

A Transient Shaper is a dynamics processor that modifies only a signal’s attack characteristics. If there’s no defined transient the TS-64 won’t do much, or worse yet, add unpleasant effects. 

Transient shapers are not just for drums—guitars, electric pianos, bass, and even some program material are all suitable for TS-64 processing if they have sharp, defined transients. And it’s not just about making transient more percussive; you can also use the TS-64 to “soften” transients, which gives a less percussive effect so a sound can sit further back in a track. 

There are two main elements to transient shaping. The first is Continue reading “The Art of Transient Shaping with the TS-64”

Posted on

Choosing the right compressor in SONAR X3 (Producer & Studio)

What is Compression?

Compression is a massively useful tool for pro audio applications. As a simultaneous corrective and creative utility suitable for both tonal shaping and controlling levels,  a compressor is one of the most important pieces of gear in your sonic toolbox.

Instead of explaining the history and value of knowing all the different types of compressors that exist, we’re just going to dive in and show you how to get results. Once you understand this you’ll be able to grasp the larger picture of compression and the many different circuits and types. SONAR X3 Studio & Producer come packed with quite a few different types of compressors, so let’s open them up and take a look.

PC76 U-Type

Modeled after one of the most classic leveling amplifiers in history, the PC76 U-Type is a go-to compressor for Continue reading “Choosing the right compressor in SONAR X3 (Producer & Studio)”

Posted on

How SONAR user Bobbi Tammaro won a SESAC award over many Major Label Artists

Respect and credibility

A few weeks ago SESAC announced their 2013 Jazz Award recipients, and SONAR X3 user Bobbi “Funkeeboy” Tommaro was one of the well-deserved artists on the list.  I have been fortunate to get to know Bobbi in the last few years on and off the SONAR playing-field, and the first word that comes to mind is “respect.”  These days considering the state of the music industry, the word respect has more meaning than ever and Bobbi has earned it from his music peers along with just about everyone else that hears his story.  Besides respect, he has earned much credibility in the Smooth Jazz world from being a repeat-offender on the Billboard charts as an independent artist.

Bobbi who is also PKA “Funkee Boy” has amassed an impressive amount of credits throughout his music career. At the young age of 15 he was already making a name for himself winning the Connecticut State Organ Championship and also opening for national acts such as Spyro Gyra.  As he progressed he scored numerous chart hits across multiple music genres, as well as, several top Billboard chart hits/Top 5 Smooth Jazz hits, and licensing deals on television networks such as ABC, FOX, NBC, CBS, SHOWTIME, VH1, etc.

Before making his own records his music has [and continues to in terms of residuals] appear on some of the most popular and well respected shows ever such as Beverly Hills 90210, General Hospital, All My Children, Sunset Beach, Ripley’s Believe It Or Not, Love Boat, One Life To Live, Young & The Restless, They Call Me Sirr, Soul Food.  Stepping out from behind the scenes as a songwriter/producer & into the forefront as a Smooth Jazz Artist, Bobbi’s track record progressed and continued to impress.

Most recently, starting off 2014 by releasing his 3rd CD “Soul Purpose”, the smooth jazz keyboardist/producer combined his talents with assembling a stellar line up of A-List recording artists. The newest award-winning record “Soul Purpose” features guest appearances from Warren Hill, Najee, Bob Baldwin, Cindy Bradley, Nick Colionne, LEILA, Surface, Lamone, Timmy Maia, Tevin Michael and more!!!

Chalk one up for the hard working jugglers. 

A few key elements set Bobbi apart from the pack that keeps him successful.  The obvious one is the raw talent of songwriting and performing his instrument, but if you go a few levels deeper, you will find a multi-instrumentalist, producer, mixing and mastering engineer.  Peeling back a few more layers exposes an organized machine who literally “does not need a label” to hit the Billboard Top 5 Smooth Jazz Chart.  In fact Bobbi has had many labels approach him and has respectfully declined any offers to do business.  Why?… because he has cracked the code and found a formula that works for himself as an independent artist competing in the major leagues.

It’s not easy

Hitting the Top 5 on any Billboard Chart is not an easy thing to do.  Besides the songs and production alone (which he does ALL in SONAR INCLUDING Mastering), Bobbi also has to oversee the efforts for Radio Promotion, Publicity, Social Media, Sales and Marketing.  If you ask me, this is a very rare skill-set to have as an artist considering just the time it takes alone to write and record a [great] full length record.  Bobbi does have help from his wife Leila who is also a very credible artist, and the two of them seem to have a great formula for getting the music out to the masses as if they were a Major Label.

Cakewalk:          It’s pretty amazing that you do so much to get your music out, can you describe the short-form version of a typical record release?

Bobbi Tammaro:            Sure, it’s hard to keep it short form because so much goes into it… So here goes Continue reading “How SONAR user Bobbi Tammaro won a SESAC award over many Major Label Artists”

Posted on

A SONAR/GIBSON CELEBRATION FOR SHAWN CLEMENT AT GIBSON BEVERLY HILLS

Have you ever been to a show and seen someone on stage that makes you never want to pick up your instrument again? Enter… Shawn Clement.  Hollywood Composer/Producer Shawn Clement graciously unleashed his new composition at the Beverly Hills Gibson Showroom tonight to a warm, yet star-studded group of industry folks from all walks of life.  Billed in half as a pre-AES party, many folks were in town to celebrate Shawn’s new work Raw Fungus, Cakewalk’s new path at Gibson, and hard working music-makers in general.

If you don’t know Shawn, his story is unique.  It stems from a long path of crazy influences, crazy talent, and crazy work ethic which has made him one of the most sought after composers in Hollywood. We would like to think he owes it all to SONAR, but we know that is not the case 😉 Continue reading “A SONAR/GIBSON CELEBRATION FOR SHAWN CLEMENT AT GIBSON BEVERLY HILLS”

Posted on

The Sound of Console Emulation in SONAR X3

The age of hybrid studios

The day has come where digital audio has caught up to the analog trends of the pre-xyz age. Hybrid (digital/analog) home-studios are more common and the need for more analog flavored plugins is a must. Cakewalk has harnessed these trends in some of the latest software additions to the X-series with their track by track Console Emulation ProChannel plugin.

At a glance

Simplicity is one of the key ingredients in the world of plugin interfaces and the Console Emulator is no stranger to that. It’s an easy tool to use, just turn up the Drive! Each algorithm has the same 3 parameters for locking in the sound, Drive, Tolerance, and Trim. Each version of the plugin reflects the circuitry of 3 classic large format console from the past 30 years. Every board has it’s own sound because each circuit is completely different than the other.

Let’s take a closer listen 

For most part, Console Emulation is about subtle character. If you apply subtle changes to your entire mix it will collectively sound different. One track may not sound all that different in the final mix, but if you apply this effect to the entirety of your session, well then you’ll probably start to hear some differences. These DSP algorithms are tuned Continue reading “The Sound of Console Emulation in SONAR X3”

Posted on

How Eliud “Liu” Ortiz used SONAR X3 for his recent Jennifer Hudson mix (RCA Records)

These days, some professional mixing and recording engineers are doing work for major labels completely missed the analogue age. Others are still mixing on consoles.  We have come to a point where there really is no “right” or “wrong” in terms of mixing.  Some tracks are mixed so perfectly that they are not signed off on by the label because they are lacking something “distinct” or “of a raw nature.”  Other times, indie songs are mixed by a band itself and find their way to the top, where at that point the label just has someone remix the single for mainstream radio. (For example compare the normal and radio mixes of Gotye “Somebody That I Used to Know.)

NYC based mixing and recording engineer Liu Ortiz has seen it from all sides of the music and business spectrum.  Starting out at such a young age of 16 as an engineer, his career has placed him with a perfect balance (at still a young age) with a ton of knowledge in both the digital and analogue worlds.  He has worked on tracks with and for artists such as Mary J. Blige, Pink, Luther Vandross, Christina Aguilera, and even RZA to name a few, and was quite a successful engineer at the Hit Factory in New York City.

Coming from the world of Cubase and Pro Tools, and after hearing all the buzz about the full feature-set of SONAR X3, Liu decided to give SONAR X3 a whirl on a new track by Jennifer Hudson feat. R Kelley for RCA Records.  After mixing the track, he found himself gravitating towards the workflow so he continued the journey onto another project called The Summer Set; a very well established band from Scottsdale Arizona who are quickly making waves internationally.  I recently got a chance to visit with Liu at the new Cakewalk Room which is ironically enough in the old Hit Factory where he often worked.  Liu showed me some of his new mixes, showed me where his picture and plaques were on the wall, and even gave me a few interesting stories about some of the “good ole days” featuring Missy Elliot, Queen Latifah and Sean Puffy Combs [don’t worry Liu – I’ll never tell 😉

Cakewalk Artist Relations:           Since you grew up on analogue consoles, what are there big sonic differences you hear now that you mix “in the box”?

 Liu Ortiz:           Well in the beginning way back when DAWs first started, I noticed that no matter what I did as I progressed with more plugins and inserts of each channel, the mix coming out the box would progressively get thinner; especially with vocals. I couldn’t really do much to fix that problem until not too long ago where technology has progressed with DAWs and computers in general.  Now, I can pretty much faithfully emulate hardware with EQ’s and compressors of pretty much all the consoles I have worked on in the past.

Neve and SSL’s had such distinctive qualities about them similar in comparison to that of Strats and Les Pauls. Since I worked on both extensively, I remember all the little nuances that each series had. So when I am mixing I just try my best to EQ with those particular traits in mind since they were my personal favorites. Pretty much all DAWs now are inherently very neutral, so I can dial in whatever tone I want and don’t have to worry about the vocals or guitars becoming shrill. I really appreciate technology now and just concentrate on crafting the best mix possible.  I must add that it is pretty amazing to me that SONAR X3 has a Console Emulator built into every bus and every track – this blew me away Continue reading “How Eliud “Liu” Ortiz used SONAR X3 for his recent Jennifer Hudson mix (RCA Records)”

Posted on

6 Mindblowing reasons to get SONAR X3 Producer

1. SONAR has redefined mixing in the box.

The ProChannel redefines the way you work with the Console View. Each audio track, instrument track, and bus comes with a complete modular strip of analog effects. Even the inspector allows the users to preview a selected track’s ProChannel strip right from the Track View. With the click of a button users can expand this analog mixing console and fully customize it by dragging around the modules, or loading up a ProChannel presets. Load up the Compressors, Tube Saturation, Reverb, Console Emulators, Tap Emulators, and the new QuadCurve EQ Zoom with Analyzer by simply right-clicking. SONAR’s ProChannel lends itself to an immensely visual experienceand to enhance this feature a step further Cakewalk introduced the fly-out panel for the Quad Curve EQ (SONAR X3 Producer Exclusive). Adding this allows users to see and modify their audio signals in real-time across a spectrum analyzer.

2. The best pitch correction software that exists is fully integrated.

ARA technology is Celemony’s way of allowing DAW’s to host the functions of any audio edit capable plugin. ARA Integration means that Melodyne can now run as a fully integrated feature within SONAR X3. Yes, you read that correctly, SONAR X3 can now run the world’s best pitch correction as a native component and SONAR X3 Studio & Producer now include Melodyne Essential.

Melodyne interacts with the new Region FX clips in SONAR – allowing users to highlight any mono audio clip and apply Melodyne pitch correction. ARA’s high quality time stretching replaces the older time stretching capabilities run by AudioSnap and SONAR X3 has the ability to convert Audio to MIDI by simply dragging and dropping audio to a MIDI track. This deeply integrated technology makes SONAR perfect solution for complex pitch correction!

3. Floating windows get in the way, so SONAR solved that problem.

If you’re looking to purge your workflow of a cryptic DAW with an unsettling interface that is not conducive to a creative environment then you should really check out what SONAR’s been doing since the X-series overhaul. We’ve pretty much ended the floating window interface to bring users a more efficient musical experience. Our Smart Tools HUD can be accessed anywhere in the interface. Our main track view houses several different workflows that are a single click or shortcut away. Screen-sets lets you save window configurations and swap between them using your numerical keys. The list goes on and on and we’re continuing to make it better with more intuitive features.

4. It takes minutes to create something awesome.

There are programs that exist only to record and edit, and then there is SONAR – which is the major contender for the entire creative experience. Every part of SONAR’s MIDI and virtual instrument implementation allows users drag in, route, and start composing within seconds.

You can save your favorite instrument and track routing as track templates and load them into other projects without any hesitation. Complex routing tasks like a multi-track setup for Addictive Drums requires no thinking – just doing. Our synth rack stays separate from the Track View and Console view so that your processing plugins stay separate from your synthesis plugins. Organization, clarity, and not a second wasted, that’s why SONAR stays on top.

5. We don’t bundle useless plugins with SONAR.

In fact, we bundle some of the best software in the industry with SONAR. We’ve already covered the fact that Melodyne Essential comes with the product – but that doesn’t even scratch the surface. 

The Nomad Factory Blue Tubes bundle ships with SONAR X3 and contains as many dynamic, time-based, and eq-based plugins that you could ever need. We have astounding instruments from AAS: Strum Acoustic SONAR, and Lounge Lizard SONAR. Lastly, Addictive Drums – which will make you want to fire your drummer and spark your MIDI programming addiction. It doesn’t stop there, check out the full list of effects and get yourself on board with the future of the DAWs.

6. You’re not limited to a Track Count or Plugin Count.

There’s always that moment when you realize that your DAW has hit a brick wall with the amount of plugins or tracks that it can handle at once. SONAR doesn’t have that problem, in fact it goes above and beyond to give you the best 64-bit architecture, unlimited tracks, buses, and effects that money can buy. We even have surround sound support! No need to constantly submix your tracks or work in parts because you don’t have thousands of dollars to drop on a “pro-system”. Even at our $99 value we’ve taken out track and effects limitations and still retain flagship features like ARA and VST3.

Upgrade to SONAR X3 Producer today!

Still not convinced? Check out SONAR free for 30-days.