{"id":11640,"date":"2013-10-01T14:09:59","date_gmt":"2013-10-01T18:09:59","guid":{"rendered":"https:\/\/noelborthwick.com\/cakewalk\/?p=11640"},"modified":"2013-10-01T14:09:59","modified_gmt":"2013-10-01T18:09:59","slug":"focus-the-low-end-of-your-kick-and-snare","status":"publish","type":"post","link":"https:\/\/noelborthwick.com\/cakewalk\/2013\/10\/01\/focus-the-low-end-of-your-kick-and-snare\/","title":{"rendered":"SONAR X3 Quicktip: Focus the Low end of your Kick and Snare with a Program EQ"},"content":{"rendered":"

Program Equalizers have been around since the 1950\u2019s and in SONAR X3 Studio and Producer users will receive two of these incredibly emulated modules.<\/p>\n

Let\u2019s take a look at what the new Program Equalizer EQP-2B can do for our kick drum. You\u2019ll notice that we have the ability to both boost and cut the same frequencies on this EQ. Choose a low frequency from the variable adjustment and then begin increasing the Boost parameter. \u00a0Increase it all the way and your kick drum signal will become quite overpowering. Adjust the Attenuate knob and the signal will begin to smooth out and focus your signal a bit better.<\/p>\n

\"\"<\/a><\/p>\n

For this country kick drum I picked 80Hz for the low end and boosted the signal to it\u2019s ceiling. \u00a0Next, I adjusted the Attenuate knob to it\u2019s lowest setting. This effectively sharpens out the boosted signals and gives the signal a unique focus in the lower spectrum. After that, I adjusted for clarity and the end result is very useable.<\/p>\n

Moving to the snare, user\u2019s can get the same effect using the PEQ5B. \u00a0This has some of the same algorithms as the EQP-2B but with an added EQ section in the bottom of the plugin. At first listen the Snare sounds a bit boxy and grainy in the low and mid-range.<\/p>\n

\"\"<\/a><\/p>\n

I applied a sharp reduction around 50HZ with the Low Shelving EQ and then another sharp cut around 800Hz. \u00a0This seemed to make all the difference. Afterwards, I moved to the upper half of this EQ and applied the same thinking that I did to the Kick but instead I focused the EQ to around 122HZ. \u00a0This will allow the snare to get out of the way of the Kick. \u00a0Next, boosting and then attenuating the signal seemed to focus the shape of the Snare right where I needed it.<\/p>\n